Team Xecuter lanza la esperada v.2.0 con una hipotética EmuNAND en Nintendo Switch.

El Team Xecuter que se está bañando en estos momentos con dinero por las ventas de SX OS, SX Pro y SX Gear, lanza una nueva versión de su CFW de pago para sus fieles usuarios que han adquirido sus productos.

Team Xecuter cómo con cada actualización, se dedica a meter alguna novedad importante y a la vez se dedica a corregir errores cómo si no hubiera un mañana.
Esta vez nos encontramos con las siguientes novedades:

Soporte a "EmuNAND" no tradicional
Si algo llevaba pidiendo la gente que compró el SX OS desde el minuto 0, era un soporte a EmuNAND en algún momento que les permitiera separar sus partidas de la NAND principal.

En esta actualización 2.0, la más importante de los últimos meses en cuanto a novedades se refiere, el Team Xecuter ha incoporado un soporte a EmuNAND disfrazado por algo totalmente distinto, es un claro caso de el lob de Caperucita Roja disfrazado de la abuelita.

El Team Xecuter ha hecho bien en añadirle las "" a su EmuNAND, porque nada tiene que ver esto con una EmuNAND de toda la vida, esta EmuNAND es bastante más peligrosa y 100% detectable y baneable por Nintendo.

Básicamente, lo que hace esta EmuNAND del Team Xecuter, es particionar la propia NAND interna de 32GB de nuestra Nintendo Switch, quitando 15GB de la propia NAND para crear un espacio paralelo donde jugar nuestras partidas. Un Dual-boot de toda la vida
Estaría todo correcto si esta EmuNAND se cargara vía MicroSD, ya que particionar la NAND es detectable por Nintendo y seguramente nos acaben baneando, de ahí que el Team Xecuter diga que su Stealth Mode se puede usar en la "EmuNAND" (ellos mismos reconocen el riesgo de esto).

Mientras esto se materializa en una posible oleada de bans sin precedentes, esta es la nota que ha compartido el Team Xecuter al respecto:
  • EmuNAND
Lets start with the major new feature in 2.0: EmuNAND.Those who have a background in the Nintendo 3DS hacking scene know what this is, but let's quickly elaborate for those of you who are new to the game:The Switch uses a NAND Flash storage chip to store all of the system software, as well as your save games and other assets. With EmuNAND we create a shadow copy of this storage from which you can run SX OS. The benefits from doing this are that you keep your SX OS "world" separated from your original firmware. This also means you can keep your switch on an older firmware, while running the latest and greatest firmware inside of your EmuNAND. As we all know, older is better.. when it comes to defeating system security at least. And newer is better when it comes to enjoying the latest content! 😉Another upside of consolidating your SX OS usage from your original firmware usage is vastly reducing the risk of a network ban. You can run SX OS in EmuNAND, of course with our Stealth Mode enabled, and anything that is littered on the EmuNAND's filesystem is not visible to the switch in Original Firmware mode.One thing to note is that SX OS EmuNAND works a bit differently compared to what some of you might think of as "traditional" EmuNAND where the entire NAND is copied to a separate partition on the MicroSD card. With SX OS EmuNAND your EmuNAND partition lives inside of your regular NAND. The primary reason for this is that occupying 32GB of a MicroSD card is a bit wasteful. The secondary reason is by utilizing the existing flash storage we can guarantee performance and reliability.You can set up EmuNAND by booting into the SX OS boot menu (hold Volume + during boot) and going into the revamped "Options" menu. There you will find a section called EmuNAND which will guide you through the setup. By default SX OS will allocate 15GB for your EmuNAND partition. If you want to use a different size hit the "advanced" button before creating your EmuNAND.SX OS will boot into EmuNAND by default if it finds a valid EmuNAND partition. If you don't want to boot into EmuNAND, there's a button in the SX OS Boot menu which will allow you to continue booting with EmuNAND disabled.

Nuevas opciones de dumpear, restaurar y reparticionar la NAND
Con las novedades anteriormente anunciadas, era evidente que el Team Xecuter había añadido en su menú nuevas opciones para administrar la NAND.

Ahora es posible dumpear nuestra NAND en la SD, bastante útil para tener una copia de seguridas, al igual que nos permite restaurarla si ocurriera algo con nuestra NAND actual.

Y cómo es evidente, si hay una opción para particionar nuestra NAND para esa "EmuNAND", también iba a existir una opción para volver a reparticionar la NAND y recuperar ese espacio perdido, conocida cómo "GPT Repair", aunque cómo bien señala el Team Xecuter, es bastante peligrosa, ya que todo lo que sea tocar la NAND tiene sus riesgos

Así presentaba el Team Xecuter estas funciones:
  • NAND Dumping, Restoring, GPT Repair
As mentioned in the previous section we have revamped our SX OS boot menu's option screen quite a bit. For the tinkerers and advanced users we introduced an easy method of dumping/restoring your NAND flash storage. Another neat addition for people who had an unhappy accident while playing with their NAND is the "GPT Repair" option. This will repair your NAND's partition table if you ever need to. Again, this functionality is for advanced users who know what they're doing only. Please be cautious when using this functionality.

Corrección de LayeredFS en 6.0.0
Si bien cuando conocimos la existencia de la versión 6.0.0 hace unos meses gracias a las filtraciones, el soporte con LayeredFS estaba roto, tras la salida oficial todos los CFW, incluídos ReiNX y Hekate ya eran compatibles con esta versión.

Todo menos SX OS, que no se actualizó durante la pasada semana y que se ha actualizado recientemente corrigiendo este error, aunque son muchos los que dicen que no funciona correctamente
  • LayeredFS working on 6.0
With our (early) support for 6.0 we introduced a regression where "LayeredFS" would no longer work. This has been corrected and you can now enjoy your game modifications/hacks again on the latest official firmware.

Compatibilidad a .NSP de Homebrews
Ya que Team Xecuter tiene que adaptarse a las nuevas tendencias de la Scene, esta no podía ser una excepción.

El Team Xecuter ha comunicado que su SX OS es compatible con los NSP,'s de Homebrew instalados directamente desde nuestro menú HOME
  • Homebrew NSP Compatibility
We got word that the community has started distributing homebrew titles as NSP files recently. These NSP files cut some corners in the way they are crafted, but we decided to introduce support to make them usable with SX OS anyway. So you can now enjoy your favorite homebrew titles that comes as installable NSP files and launch them directly from the home screen!
Recuerda que puedes descargar esta versión de SX OS Aquí


Fuente: Team Xecuter